BTC12N-*
Product Description
2020-05
7
The BTC12 is optimized for modern, Ultra HD-compatible monitors. In a standard scenario, up
to two Ultra HD-capable monitors can be connected to the native DisplayPorts™.
The DP++ functionality in the DisplayPort™ interface also allows the connection of monitors
with an HDMI interface. Passive DisplayPort™ to HDMI adapter cables can be used and are
available as accessories. When using an adapter, the maximum supported resolution is limited
to Full HD.
An active DisplayPort™ to HDMI 2.0 adapter is required to connect an Ultra HD-capable moni-
tor or TV through an HDMI 2.0 interface. These adapters are available as accessories.
Figure 2.2 Series connection of up to three Multi-Stream Transport (MST) capable DisplayPort™
monitors
DisplayPort™ Multi-Stream Transport (MST) protocol technology allows a series connection of
up to three monitors. This requires monitors that have a DisplayPort™ MST hub. Monitor 1 is
connected direct to the BTC12 DisplayPort™ and the video signal is connected to monitor 2
and monitor 3 in series.
Triple Monitor Setup with DisplayPort™ MST
Note
The BTC12 allows a series connection of up to three monitors. When monitors are connected
in series from one DisplayPort™, the second DisplayPort™ is disabled.
To Next Page
Loading...