2023-03
44
K-System – Signal Conditioners
Technical Specifications
Position 5 GUT Temperature converter with trip value
HLC HART Loop Converter
HMM HART Multiplexer Master
HMS HART Multiplexer Slave
LGH Place holder isolator
PT Potentiometer converter
RC Converter for resistors
RCI Solenoid driver
RO Relay module
RR Thermometer resistance repeater
RSH Relay module in fail-safe technology
SCD SMART current driver
SCS SMART current driver/repeater
SD Solenoid driver, loop powered
SH Switch amplifier in fail-safe technology
SL Solenoid driver, bus powered
SLD Solenoid driver, bus and loop powered
SON Switch amplifier with NAMUR output
SOT Switch amplifier with passive, potential free transistor output
SR Switch amplifier with relay output
SRA Switch amplifier with relay output, 2:1 operation mode
SRT Switch amplifier with active transistor and relay output
ST Switch amplifier with active transistor output
STC SMART transmitter power supply with current output
STR Power supply
STV SMART transmitter power supply with voltage output
TR RTD converter
TT Converter for thermocouple/mV signal
UFC Universal frequency converter
UFT Frequency converter with direction and synchronization monitoring
USC Universal signal converter with trip value
UT Universal temperature converter
VC Converter for current/voltage
VCR Transmitter power supply, repeater for current/voltage
VD Solenoid driver
VM Solenoid driver
VR Voltage repeater
WAC Strain gauge converter
To Next Page
Loading...
