K-System – Signal Conditioners
Product Specifications
2023-03
7
2 Product Specifications
2.1 Function
Signal conditioners are isolators used for the galvanic isolation of non-intrinsically safe
applications. Signal conditioners have the necessary current and voltage limitation between
field circuit and control.
Figure 2.1 Function – isolating, amplifying and transforming signals
The K-System consists of wide range of signal conditioners suitable for mounting on 35 mm
DIN mounting rail. K-System is easy to specify, integrate and expand. Our extensive line
of signal conditioners for safety location applications contains over 60 different devices.
Figure 2.2 K-System on Power Rail
Control
system
Sensor
Actuator
To Next Page
Loading...
