K-System – Signal Conditioners
Mounting and Installation
2023-03
19
3 Mounting and Installation
3.1 Mounting
Danger!
Danger to life from using damaged or repaired devices.
Using a defective or repaired device can compromise its function and its electrical safety.
• Do not use a damaged or polluted device.
• The device must not be repaired, changed or manipulated.
• If there is a defect, always replace the device with an original device from Pepperl+Fuchs.
Danger!
Danger to life from pollution
An excessively polluted surface of the device can become conductive. As a result, the device
loses its galvanic isolation.
Ensure that you install the device only in environments with a pollution degree 2 or better
according to IEC/EN 60664–1.
Danger!
Danger to life from electric shock
Absent or insufficient insulation can result in electric shock.
Only connect supplies that provide protection against electric shock to power feed modules
(e. g. SELV or PELV).
Caution!
Property damage from use of isolators for Power Rail supply
Using the isolators for Power Rail supply can damage the isolators and make the Power Rail
fail.
Do not supply the Power Rail via isolators.
To Next Page
Loading...
