Pepperl+Fuchs KFD2-UT2 Series User Manual

2019-10
20
Functional Safety KFD2-UT2-(Ex)*(-1)
Operation
6. Remove the RTD simulator. Check if a lead breakage is detected.
The red LED is flashing. The output behavior in the event of a fault depends
on the device configuration.
7. Set the device back to the original settings after the test.

Pepperl+Fuchs KFD2-UT2 Series Specifications

General

Brand	Pepperl+Fuchs
Model	KFD2-UT2 Series
Category	Media Converter
Language	English