KFU8-DW-1.D
Product Description
129506 2012-12
11
4 Product Description
4.1 Device description
The rotational speed monitor KFU8-DW-1.D is a device for displaying
and monitoring periodical signals which occur in almost all areas of
process automation, i.e. from general frequencies to specific speeds.
The input signals are evaluated and converted into a frequency or
speed by a powerful -controller in accordance with the cycle
method.
Furthermore, in applications involving slow processes, where sensors
deliver multiple pulses per revolution, it is possible to automatically
operate with the actual speed of the drive by specifying the number of
pulses per revolution.
The measured value is displayed on a 7-segment LED display on the
front of the device. The display has 4 digits and up to 3 decimal
places. The parameterization is performed using the 4 buttons below
the display.
Note!
Close attention was paid to the special case of speed measurement
during the development of the device. The indicators and inputs can
therefore occur in Hz or in rpm.
To Next Page
Loading...
Need help?
General
