Pepwave MAX 700 - Page 119

Pepwave MAX and Surf User Manual
http://www.pepwave.com 119 Copyright @ 2016 Pepwave
C
lick Add Rule to display the following screen:
Inbound firewall settings are located at Advanced>Firewall>Access Rules>Inbound
Firewall Rules.
Click Add Rule to display the following screen:
Rules are matched from top to bottom. If a connection matches any one of the upper
rules, the matching process will stop. If none of the rules match, the Default rule will be
applied. By default, the Default rule is set as Allow for both outbound and inbound
access.