EasyManua.ls Logo

Pepwave MAX BR1 Mini User Manual

Default Icon
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved.
Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may
be trademarks or registered trademarks of their respective owners.
Pepwave MAX and Surf
User Manual
Pepwave Products:
MAX 700/HD2/HD2 IP67/HD2 mini/HD4/Transit/Hotspot/BR1/BR1 Mini/BR1 Slim/BR1
ENT/BR1 Pro LTE/BR1 IP55/BR2 IP55/On-The-Go/MAX HD2/HD4 with
MediaFast/Device Connector/ Surf SOHO
Pepwave Firmware 6.3
September 2016

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Pepwave MAX BR1 Mini and is the answer not in the manual?

Pepwave MAX BR1 Mini Specifications

General IconGeneral
BrandPepwave
ModelMAX BR1 Mini
CategoryWireless Router
LanguageEnglish

Summary

3 Product Features

3.1 Supported Network Features

Lists supported network features for WAN and LAN connections.

5 Advanced Feature Summary

5.1 Drop-in Mode and LAN Bypass: Transparent Deployment

Explains how to install routers without network changes and bypass functionality.

5.2 QoS: Clearer VoIP

Describes using QoS to prioritize VoIP and video conferencing traffic.

5.3 Per-User Bandwidth Control

Allows defining bandwidth policies for user groups to prevent congestion.

5.4 High Availability via VRRP

Explains deploying two routers for redundancy and failover.

5.6 Built-In Remote User VPN Support

Covers connecting remote clients securely using L2TP with IPsec or PPTP.

6 Installation

6.1 Preparation

Lists necessary items and information before installing the Pepwave router.

6.2 Constructing the Network

Provides step-by-step instructions for setting up the network.

6.3 Configuring the Network Environment

Guides on ensuring the router works properly in LAN and WAN environments.

8 Connecting to the Web Admin Interface

9 Configuring the LAN Interface(s)

9.1 Basic Settings

Covers basic LAN interface settings, including IP address and VLAN configuration.

9.2 Captive Portal

Explains how to enable and configure captive portals for client access.

10 Configuring the WAN Interface(s)

10.1 Ethernet WAN

Details configuration for Ethernet WAN connections, including DHCP, Static IP, and PPPoE.

10.2 Cellular WAN

Explains how to configure cellular WAN settings, including IMSI, MEID, ESN, and IMEI.

10.3 Wi-Fi WAN

Covers Wi-Fi WAN settings, including SSID, security, and roaming.

10.4 WAN Health Check

Describes how to configure health checks for WAN connections to ensure traffic routing.

10.5 Dynamic DNS Settings

Explains how to register domain names with dynamic DNS providers.

11 Advanced Wi-Fi Settings

13 Bandwidth Bonding SpeedFusionTM / PepVPN

13.1 PepVPN

Explains how to configure PepVPN for site-to-site connectivity with encryption.

14 IPsec VPN

14.1 IPsec VPN Settings

Guides on configuring IPsec VPN connections with various encryption standards.

15 Outbound Policy Management

15.1 Outbound Policy

Explains how to manage and load balance outbound traffic among WAN connections.

15.2 Custom Rules for Outbound Policy

Details creating custom rules for outbound traffic behavior and prioritization.

16 Inbound Access

16.1 Port Forwarding Service

Covers setting up port forwarding to allow internet users access to internal servers.

17 NAT Mappings

18 QoS

19 Firewall

19.1 Outbound and Inbound Firewall Rules

Details configuring firewall rules for outbound and inbound traffic filtering.

21 System Settings

21.1 Admin Security

Covers user account management, password policies, and web access security.

21.2 Firmware

Explains how to upgrade the router's firmware online or manually.

22 Status

Appendix A. Restoration of Factory Defaults

Related product manuals