Pepwave MAX and Surf User Manual
http://www.pepwave.com 31 Copyright @ 2016 Pepwave
4.14 MAX On-The-Go
4.14.1 Panel Appearance
4.14.2 LED Indicators
T
he statuses indicated by the front panel LEDs are as follows:
Cellular Indicators
WAN
OFF Modem is not attached to the port
Green Modem is attached to the port
Wi-Fi Indicators
Wi-Fi
OFF Disconnected from AP
Green Connected to AP
Status Indicators
Status
OFF System initializing
Red Booting up or busy
Green Ready
LAN and Ethernet WAN Ports
Green LED
ON 100 Mbps
OFF 10 Mbps
Orange LED
ON Port is connected without traffic
Blinking Data is transferring
Port Type Auto MDI/MDI-X ports