Wi-Fi AP Settings
SSID
Select if an SSID is broadcasting on 2.4 Ghz, 5 Ghz or both bands
Operating Country
This option sets the country whose regulations the Pepwave router
follows.
Protocol
This option allows you to specify which client association requests will
be accepted. By default,
802.11ng
is selected.
Channel Width
Settings for 2.4 GHz AP and 5GHz AP can be configured here:
2.4 GHz: 40 MHz, 20/40 MHz
and
20 MHz
are available. The default
setting is
20/40 MHz,
which allows both widths to be used
simultaneously.
80 MHz , 40 Mhz, 20 Mhz,
and
(20/40 MH)
are available. The default
setting is
80 MHz
.
Note: 802.11ng and 802.11na are not part of the 802.11 standard. It is
simply a notation for indicating 802.11n use on the 2.4-GHz band
(11ng) or 802.11n use on the 5-GHz band (11na).
Channel
This option allows you to select which 802.11 RF channel will be used.
To Next Page
Loading...
