Auto Channel
Update
Indicate the time of day for updating the automatic channel selection.
Output Power
This option is for specifying the transmission output power for the Wi-
Fi AP. There are 4 relative power levels available –
Max
,
High
,
Mid
, and
Low
. The actual output power will be bound by the regulatory limits of
the selected country.
Client Signal
Strength Threshold
This field determines that maximum signal strength each individual
client will receive. The measurement unit is dBm.
Maximum number
of clients
Enter the maximum number of clients that can simultaneously connect
to the wireless network or enter 0 to allow an unlimited number of
connections.
Discover Nearby
NetworksA
This option is to turn on and off to scan the nearby the AP.
Note
: Feature will be automatically turned on with Auto Channel /
Dynamic Output Power
Beacon RateA
This option is for setting the transmit bit rate for sending a beacon. By
default,
1Mbps
is selected.
Beacon IntervalA
This option is for setting the time interval between each beacon. By
default,
100ms
is selected.
DTIMA
This field allows you to set the frequency for the beacon to include a
delivery traffic indication message. The interval is measured in
milliseconds. The default value is set to
1 ms
.
RTS Threshold
Set the minimum packet size for your access point to send an RTS
using the RTS/CTS handshake. Setting 0 disables this feature.
Fragmentation
ThresholdA
Determines the maximum size (in bytes) that each packet fragment will
be broken down into. Set 0 to disable fragmentation.
Distance/Time
ConverterA
Select the distance you want your Wi-Fi to cover in order to adjust the
below parameters. Default values are recommended.
Slot TimeA
This field is for specifying the wait time before the Surf SOHO
transmits a packet. By default, this field is set to
9 µs
.
ACK TimeoutA
This field is for setting the wait time to receive an acknowledgement
packet before performing a retransmission. By default, this field is set
to
48 µs
.
A – Advanced feature. Click the button on the top right-hand corner to activate.
To Next Page
Loading...
