Privacy Protocol
This setting specifies via a drop-down menu one of the following
valid privacy protocols:
None
DES
AES
When AES or DES is selected, an entry field will appear for the
password.
InControl
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and configure
your devices automatically. All of this is now possible with InControl.
When this checkbox is checked, the device’s status information will be sent to the Peplink
InControl system. This device’s usage data and configuration will be sent to the system if you
enable the features in the system.
When the box
Restricted to Status Reporting Only
is ticked, the router will only report its status,
but can’t be managed or configured by InControl.
Alternatively, you can also privately host InControl. Simply check the “Privately Host InControl”
box and enter the IP Address of your InControl Host. If you have multiple hosts, you may enter
the primary and backup IP addresses for the InControl Host and tick the “Fail over to InControl in
the cloud” box. The device will connect to either the primary InControl Host or the
secondary/backup ICA/IC2.
You can sign up for an InControl account at https://incontrol2.peplink.com/
(https://incontrol2.peplink.com/). You can register your devices under the account, monitor their
status, see their usage reports, and receive offline notifications.
To Next Page
Loading...
