SNMP Community Settings
Community Name
This setting specifies the SNMP community name.
Allowed Source
Subnet Address
This setting specifies a subnet from which access to the SNMP server is
allowed. Enter subnet address here (e.g.,
192.168.1.0
) and select the
appropriate subnet mask.
To define a username for SNMPv3, click
Add SNMP User
in the
SNMPv3 User Name
table, upon
which the following screen is displayed:
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in SNMPv3.
Authentication
Protocol
This setting specifies via a drop-down menu one of the following
valid authentication protocols:
NONE
MD5
SHA
When MD5 or SHA is selected, an entry field will appear for the
password.
To Next Page
Loading...
