SP Default Conguration
The SP Default Configuration feature written in the updated KB article allows for the provisioning
of custom made settings (a.k.a. InControl2 configuration) via the Ethernet LAN port and is ideal
for those wanting to do a bulk deployment of many Peplink devices.
Note
: If you would like to use this feature, please contact your purchase point (Eg.VAD).
Peplink Relay
Cloud Service Providers often restrict access to certain applications. With SFC Relay, you can route
traffic before going out to the Internet, allowing access to previously restricted applications
experienced with the public SpeedFusion Cloud nodes. Available as an add-on for your home
router or as an upgradable license to your Peplink router, SFC Relay is sure to impress you and
any peers you give access to.
https://forum.peplink.com/t/configure-speedfusion-cloud-relay-server-and-
client/6215ca9b017e48e0f3ff2479/ (https://forum.peplink.com/t/configure-speedfusion-cloud-
relay-server-and-client/6215ca9b017e48e0f3ff2479/)
DNS over HTTPS (DoH)
DoH provides the benefits of communicating DNS information over a secure HTTPS connection in
an encrypted manner. The protocol offers increased privacy and confidentiality by preventing data
interception and man-in-the-middle attacks.
Peplink InTouch
InTouch is Peplink’s zero-touch remote network management solution, leveraging InControl 2 and
a SpeedFusion Connect (formerly known as SpeedFusion Cloud) data plan. This service extends a
network administrator’s ability to reach any device UI backed by a Peplink/Pepwave router. To
configure InTouch, all you need is a valid InControl 2 subscription, a SpeedFusion Connect data
plan, and a Peplink/Pepwave router (which requires the latest 8.2.0 firmware).
To watch a demonstration and read the FAQ, visit https://www.peplink.com/enterprise-
solutions/intouch/ (https://www.peplink.com/enterprise-solutions/intouch/)
Or learn to configure InTouch at https://youtu.be/zg0iavHGkJw (https://youtu.be/zg0iavHGkJw)
To Next Page
Loading...
