The
Dashboard
shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN
connection priority and switch on/off the Wi-Fi AP.
Device Information
displays details about the device, including model name, firmware
version,CPU Load, throughput and uptime..
Important Note
Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking
the
Save
button at the bottom of each page. The
Apply Changes
button causes the changes to
be saved and applied.
Ch. 6 SpeedFusion Connect Protect
With Peplink products, your device is able to connect to SpeedFusion Cloud without the use of a
second endpoint. This service has wide access to a number of SpeedFusion endpoints hosted from
around the world, providing your device with unbreakable connectivity wherever you are.*
*SpeedFusion Connect Protect is supported in firmware version 8.1.0 and above. SpeedFusion
Connect Protect is a subscription basis. SpeedFusion Connect Protect license can be purchased at
https://estore.peplink.com/
(https://estore.peplink.com/)
> SpeedFusion Service > SpeedFusion
To Next Page
Loading...
