Connect Protect
.
Activate SpeedFusion Connect Protect
All Care plans now come with SpeedFusion Connect Protect included. This data allowance will
automatically begin and end in accordance with your warranty. No activation is required.
Enable SpeedFusion Connect Protect
Access the Web Admin of the device you want to create as the Peplink Relay Server, navigating to
the “AFC Protect” tab.
To set up a Peplink Relay Server, select “
Relay Mode – for Inbound accesses
” > Choose the
SFC
Protect Location
you wish to connect to > Click on the
green tick button
to confirm the change.
To Next Page
Loading...
