The Relay Sharing Code will be generated and otherpeers can use this code to establish a
SpeedFusion Connect connection that will forward the traffic to this device, allowing them to
access local networks and the Internet via your WAN connection.
To connect to SpeedFusion Connect Protect, you can select a
SFC Protect Location
of your choice,
or simply
Automatic
, then the device will establish a connection to the nearest cloud server.
Choose
Automatic > Click on the green tick button
to confirm the change.
Or you may select
Home Sharing
and use your
Relay Sharing Code
to create a profile if you have
set up a Peplink Relay Client on another device.
To Next Page
Loading...
