On this screen, you can enable specific ports, name the LAN ports, as well as determine the speed
of the LAN ports.
Port Settings
Name
Enter a name for the LAN port.
Enable
Tick to enable or disable the specific port.
Speed
This is the port speed of the LAN interface. It should be set to the same speed
as the connected device to avoid port negotiation problems. When a static
speed is set, you may choose whether to advertise its speed to the peer device.
Auto
is selected by default. You can choose not to advertise the port speed if
the port has difficulty negotiating with the peer device.
Port Type
This field is to configure the port type to Trunk or Access for the LAN port.
VLAN
Networks
Assign a VLAN to a LAN port.
Ch. 8 Conguring the WAN interface
To Next Page
Loading...
