WAN Interface settings are located at
Network > WAN
.
The router supports wan connections supplied by a USB 2.0 Interface USB cellular modem,
Ethernet, or Wi-Fi.
To reorder the WAN priority, drag on the appropriate WAN by holding the left mouse button, move
it to the desired priority (the first one would be the highest priority, the second one would be
lower priority, and so on), and drop it by releasing the mouse button.
To disable a particular WAN connection, drag on the appropriate WAN by holding the left mouse
button, move it the
Disabled
row, and drop it by releasing the mouse button.
You can also set priorities on the
Dashboard
. Click the
WAN
button in the corresponding row to
modify the connection setting.
DNS over HTTPS (DoH)
You can enable DoH (DNS over HTTPS) support in this section.
DNS over HTTPS
Enable
When this option is enabled, the DNS proxy server will use HTTPS connections to
forward DNS requests to the DoH resolver; it will not fallback to traditional UDP DNS
options.
To Next Page
Loading...
