SpeedFusion VPN > Send ALL trac
This feature allows you to redirect all traffic to a specified PepVPN connection. Click the
button to select your connection and the following menu will appear:
You can (optionally) specify a DNS server to resolve incoming DNS requests.
Handshake Port
Click the icon to customize the handshake port (TCP) used to initialize the SpeedFusion VPN
connection.
The handshake uses TCP port 32015 by default.
Link Failure Detection Time
The bonded VPN can detect routing failures on the path between two sites over each WAN
connection. Failed WAN connections will not be used to route VPN traffic. Health check packets
are sent to the remote unit to detect any failure. The more frequently checks are sent, the shorter
the detection time, although more bandwidth will be consumed.
To Next Page
Loading...
