Pepwave Surf SOHO - Page 77

Local Service Firewall Settings
Rule Name This setting specifies a name for the firewall rule.
Enable This setting specifies whether the firewall rule should take effect. If the box is
checked, the firewall rule takes effect. If the traffic matches the specified
protocol/IP/port, actions will be taken by the Pepwave router based on the
other parameters of the rule. If the box is not checked, the firewall rule does
not take effect. The Pepwave router will disregard the other parameters of the
rule.
Click the dropdown menu next to the checkbox to place this firewall rule on a
time schedule.
Service This option allows you to define the supported local service to be matched.
If Any is chosen, the firewall rule will match to all supported local services
from the list.
Via a drop-down menu, the following services can be specified:
Any
SpeedFusion / PepVPN Handshake
SpeedFusion / PepVPN Data Port
Web Admin Access
DNS Server
SNMP Server
WAN
Connection
Select the WAN connection that this firewall rule should apply to.
Source This specifies the source IP address and IP Network to be matched for the
firewall rule.