Pepwave Surf SOHO - Page 82

Area ID Determine the name of your Area ID to apply to this group. Machines
linked to this group will send and receive related OSPF packets, while
unlinked machines will ignore it.
Link Type Choose the network type that this area will use.
Authentication Choose an authentication method, if one is used, from this drop-down
menu. Available options are MD5 and Text . Enter the authentication key
next to the drop-down menu.
Interfaces Determine which interfaces this area will use to listen to and deliver OSPF
packets
Interface Cost Enable the advanced option (question mark) to be able to configure a
custom cost for each interface.
To access RIPv2 settings, click
.
RIPv2 Settings
Authentication Choose an authentication method, if one is used, from this drop-down
menu. Available options are MD5 and Text . Enter the authentication key
next to the drop-down menu.
Interfaces Determine which interfaces this group will use to listen to and deliver RIPv2
packets.