OSPF & RIPv2 Route Advertisement
SpeedFusion VPN
Route Isolation
Enable this option if you want to isolate PepVPN peers from each
other. Received PepVPN routes will not be forwarded to other PepVPN
peers to reduce bandwidth consumption.
Note: This will only hide routing information between PepVPN peers, if
you want to fully block inter-PepVPN traffics, you should configure
Firewall rules instead.
Network
Advertising
Selected networks will be advertised over OSPF & RIPv2. If no network
is selected, all LAN / VLAN networks will be advertised by default.
All the networks belonging to interfaces that have OSPF or RIPv2
enabled will be advertised even if they are not selected in this table.
Static Route
Advertising
Enable this option to advertise LAN static routes over OSPF & RIPv2.
Static routes that match the Excluded Networks table will not be
advertised.
BGP
BGP (Border Gateway Protocol) is a protocol that manages how packets are routed across the
internet through the exchange of routing and reachability information between edge routers. BGP
directs packets between autonomous systems (AS) — networks managed by a single enterprise or
service provider.
Click the Network tab from the top bar, and then click the
BGP
item on the sidebar to configure
BGP.
Click “
x
” to delete a BGP profile
Click “
Add
” to add a new BGP profile
To Next Page
Loading...
