BGP Profile
Name
This field is for specifying a name to represent this profile.
Enable
When this box is checked, this BGP profile will be enabled.
If it is left unchecked, it will be disabled.
Interface
The interface in which the BGP neighbor is located.
Autonomous
System
The Autonomous System Number (ASN) assigned to this profile.
Neighbor
BGP Neighbors and their details.
IP address
The IP address of the Neighbor.
Autonomous
System
The Neighbor’s ASN.
Multihop/TTL
This field determines the Time-to-live (TTL) of BGP packets.
Leave this field blank if the BGP neighbor is directly connected, otherwise
you must specify a TTL value. This option should be used if the configured
Neighbor’s IP address does not match the selected Interface’s network
subnets. The TTL value must be between 2 to 255.
Password
(Optional) Assign a password for MD5 authentication of BGP sessions.
To Next Page
Loading...
