AS-Path
Prepending:
AS path to be prepended to the routes received from this Neighbor.
Values must be ASN and separated by commas.
For example: inputting “64530,64531” will prepend “64530, 64531” to
received routes.
Hold Time
Wait time in seconds for a keepalive message from a Neighbor before
considering the BGP connection as stalled.
The value must be either 0 (infinite hold time) or between 3 and 65535
inclusively.
Default: 240
Next Hop Self
Enable this option to advertise your own source address as the next hop
when propagating routes.
iBGP Local
Preference
This is the metric advertised to iBGP Neighbors to indicate the preference
for external routes. The value must be between 0 to 4294967295
inclusively.
Default: 100
BFD
Enable this option to add Bidirectional Forwarding Detection for path
failure. All directly connected Neighbors that use the same physical
interface share the same BFD settings. All mulithop Neighbors share the
same multihop BFD settings. You can configure BFD settings in the BGP
profile listing page after this option is enabled.
Route Advertisement Settings
Network
Advertising
Select the Networks that will be advertised to the BGP Neighbor.
Static Route
Advertising
Enable this option to advertise static LAN routes. Static routes that
match the Excluded Networks table will not be advertised.
To Next Page
Loading...
