Filter Mode
This field allows for the selection of the filter mode for route export.
None
: All BGP routes will be accepted.
Accept
: Routes in “Restricted Networks” will be accepted, routes not
in the list will be rejected.
Reject
: Routes in “Restricted Networks” will be rejected, routes not
in the list will be accepted.
Restricted / Blocked
Networks
This field specifies the network(s) in the “route export” entry.
Exact Match:
When this box is checked, only routes with the same
Network and Subnet Mask will be filtered.
Otherwise, routes within the Networks and Subnets will be filtered.
Export to other BGP
Profile
When this box is checked, routes learnt from this BGP profile will be
exported to other BGP profiles.
Export to OSPF
When this box is checked, routes learnt from this BGP profile will be
exported to the OSPF routing protocol.
Ch. 15 Remote User Access
A remote-access VPN connection allows an individual user to connect to a private business
network from a remote location using a laptop or desktop computer connected to the Internet.
Networks routed by a Peplink router can be remotely accessed via OpenVPN, L2TP with IPsec or
PPTP. To configure this feature, navigate to
Advanced > Remote User Access
and choose the
required VPN type.
L2TP with IPsec
To Next Page
Loading...
