L2TP with IPsec
Pre-shared Key
Enter your pre shared key in the text field. Please note that remote devices
will need this preshared key to access the Balance.
Disable Weak
Ciphers
Click the button to show and enable this option.
When checked, weak ciphers such as 3DES will be disabled.
Listen On
This setting is for specifying the WAN IP addresses that allow remote user
access.
Continue to configure the authentication method.
OpenVPN
Select OpenVPN and continue to configure the authentication method.
The OpenVPN Client profile can be downloaded from the
Status > device
page after the
configuration has been saved.
You have a choice between 2 different OpenVPN Client profiles.
“route all traffic” profile :
Using this profile, VPN clients will send all the traffic through the
OpenVPN tunnel
“split tunnel” profile:
Using this profile, VPN clients will ONLY send those traffic designated
to the untagged LAN and VLAN segment through the OpenVPN tunnel.
To Next Page
Loading...
