Host
Specifies the IP address or hostname of the RADIUS server host.
Authentication
Port
This setting specifies the UDP destination port for authentication
requests. By default, the port number is 1812.
Secret
This field is for entering the secret key for communicating to the RADIUS
server.
Accounting Port
This setting specifies the UDP destination port for accounting requests.
By default, the port number is 1813.
Certicate Manager
This section allows you to assign certificates for the local VPN, OpenVPN, Captive Portal,
Mediafast, Contenthub, Wi-Fi WAN (Client and CA) and web admin SSL for extra security.
Read the following knowledgebase article for full instructions on how to create and import a self-
signed certificate: https://forum.peplink.com/t/how-to-create-a-self-signed-certificate-and-import-
it-to-a-peplink-product/ (https://forum.peplink.com/t/how-to-create-a-self-signed-certificate-and-
import-it-to-a-peplink-product/)
Service Forwarding
Service forwarding settings are located at
Advanced > Misc. Settings > Service Forwarding
.
To Next Page
Loading...
