SMTP Forwarding
Some ISPs require their users to send emails via the ISP’s SMTP server. All outgoing SMTP
connections are blocked except those connecting to the ISP’s. Pepwave routers support
intercepting and redirecting all outgoing SMTP connections (destined for TCP port 25) via a WAN
connection to the WAN’s corresponding SMTP server.
To enable the feature, select
Enable
under
SMTP Forwarding Setup
. Check
Enable Forwarding
for the WAN connection(s) that needs forwarding. Under
SMTP Server
, enter the ISP’s email
server hostname or IP address. Under
SMTP Port
, enter the TCP port number for each WAN.
The Pepwave router will intercept SMTP connections. Choose a WAN port according to the
outbound policy, and then forward the connection to the SMTP server if the chosen WAN has
enabled forwarding. If the forwarding is disabled for a WAN connection, SMTP connections for the
WAN will be simply be forwarded to the connection’s original destination.
Web Proxy Forwarding
To Next Page
Loading...
