Need help?Do you have a question about the Percussionaire TXP-2D and is the answer not in the manual?
General| Brand | Percussionaire |
|---|---|
| Model | TXP-2D |
| Category | Medical Equipment |
| Language | English |
High-frequency ventilator for neonatal transport, pressure limited and time cycled.
Describes the Front panel, Phasitron®, and Ventilator switch as key parts of the system.
Provides visual indication of airway pressure in cmH2O or kPa.
Controls Mean Airway Pressure or Amplitude indication on manometer.
Displays the high frequency rate in bpm when button is pressed.
Knobs for setting high-frequency rate and pressure/chest wiggle.
Mechanical/Physiological interface, a sliding venturi for inhalation/exhalation, protects lungs.
Aims to limit pressure and optimize volumes; suitable for neonates with RDS, PPHN, etc.
Monitor PaO2/PCO2 changes and ensure no tracheal or ETT obstruction.
Control knobs include High Frequency (rate), Amplitude, Mean Airway Pressure, and O2 conc. %.
Adjustments for CO2 and PO2 levels using Amplitude, Rate, FIO2, and MAP.
Instructions for connecting the NO kit to the ventilator and test lung for setup.
New products are clean; disassembly and sterilization/decontamination recommended prior to use.
Recommends Sterrad® 100S for sterilization; follow disassembly instructions.
Decontamination based on temperature parameters: <280F for Phasitron, <140F for tubing.
All devices sold with a one-year warranty on parts and labor from date of set-up.
Devices checked by authorized center; annual PM recommended; 3-year life span.
Lubricate o-rings on breathing harness and Phasitron® diaphragm after cleaning/sterilization.
Details size, weight, battery requirements, gas consumption, and I:E ratios.
Identifies specific valve components like HF-TB-20 and Amplitude-FA-1 for calibration.
Connect circuit/test lung, set PEEP, gas source, and remove knobs for calibration.
Detailed steps for calibrating Amplitude and HF controls, ensuring correct frequency and pressure.
Set up using standard HF circuit/test lung, ensure manometer zero, connect gas.
Verify High Frequency and Amplitude knob functions, observe frequency ranges, and check max frequency.
Diagram showing PEEP adapter, PEEP valve, sleeve, and Phasitron for circuit A50605.
Lists accessories like Lube tube, NO kit, and Neo test lung not depicted in the diagram.
Exploded view of the Phasitron® A50007-12 with part labels.
Lists accessories for Phasitron, including PEEP valve, adapter, failsafe valve, and NO kit.
Diagram illustrating the NO Kit A50610 assembly.
Three simulation scenarios to test setup and parameter adjustment skills.
Setup neonatal lung model, interpret ABG, and determine necessary ventilator changes.
Identify controls (HF, Amplitude, Mean Airway Pressure) and their functions.
Explain in own words how the Phasitron® functions.
Name two ventilator changes that would decrease CO2 during transport.
Describe how mean airway pressure is controlled.
State the classification of the TXP®-2D ventilator.
Identify the recommended NO system for the TXP®-2D.
Discuss if NO concentrations are maintained if patient breathes spontaneously.
To Next Page
