Perfect Aire 3PAMSHH09-UVW

To Next Page

HYPER HEAT









Main Page

Need help?

Do you have a question about the Perfect Aire 3PAMSHH09-UVW and is the answer not in the manual?

Summary

Safety Precautions

General Safety Warnings and Symbols

Covers warnings, cautions, and symbol meanings for safe operation.

Electrical, Installation, and Product Safety

Details electrical, installation, maintenance, and product use safety guidelines.

Unit Specifications and Features

Indoor Unit Display and Operating Temperatures

Explains the indoor unit display indicators and operational temperature limits.

Advanced Unit Features and Operation

Describes special features like Auto-Restart, Active Clean, Sleep, and manual operation.

Care and Maintenance

Cleaning Procedures and Filter Reminders

Details cleaning the indoor unit, air filters, and filter replacement reminders.

Seasonal Maintenance Guidance

Provides instructions for long-term non-use and pre-season inspection.

Troubleshooting

Safety and Common Operational Issues

Safety warnings for troubleshooting and common issues like unit not starting or making noise.

Performance, Malfunctions, and Error Codes

Addresses performance issues, unit malfunctions, and interpreting error codes.

Indoor Unit Installation Manual

Installation Overview and Unit Parts

Overview of indoor unit installation steps and identification of unit parts.

Location, Mounting Plate, and Wall Hole Preparation

Guidelines for location, attaching the mounting plate, and drilling the wall hole.

Piping, Drain Hose, and Cable Connections

Instructions for refrigerant piping, drain hose, and cable connections.

Mounting the Indoor Unit and Electrical Safety

Procedures for mounting the unit and critical electrical safety before wiring.

Outdoor Unit Installation

Location, Drain Joint, and Anchoring

Guidelines for location, installing the drain joint, and anchoring the outdoor unit.

Mounting Dimensions and Cable Connections

Details on mounting dimensions and connecting signal/power cables.

Refrigerant Piping Connection

Pipe Preparation: Length, Cutting, and Burrs

Information on pipe length, cutting, and removing burrs.

Flaring, Connecting, and Torque

Steps for flaring pipe ends, connecting pipes, and applying correct torque.

Connecting to Outdoor Unit Valves

Detailed instructions for connecting refrigerant piping to outdoor unit valves.

Air Evacuation

Preparations, Evacuation, and Refrigerant Charging

Safety, preparation, evacuation steps, and refrigerant charging information.

Electrical and Gas Leak Checks

Initial checks for electrical safety and gas leaks after evacuation.

Electrical and Gas Leak Checks

Pre-Test Run Checks

Essential checks for electrical safety and gas leaks before operating the unit.

Leak Detection Methods

Describes methods for detecting gas leaks using soap and water or a leak detector.

Test Run Procedures

Performing the Test Run and Double-Checking Connections

Steps for performing the test run and re-checking pipe connections for leaks.

Cold Weather Test Run Procedure

Special procedure for testing the COOL function in cold ambient temperatures.

Packing and Unpacking the Unit

Unit Packing and Unpacking Instructions

Guides on how to pack and unpack the indoor and outdoor units for storage or transport.

This document is an owner's manual for a Perfect Aire Hyper Heat Mini-Split System, covering both operation and installation. The manual details various aspects of the device, including its specifications, features, maintenance, troubleshooting, and installation procedures.

Function Description:

The Perfect Aire Hyper Heat Mini-Split System is an air conditioning unit designed for both cooling and heating, with specific features for hyper heat performance. It operates as a mini-split system, meaning it consists of separate indoor and outdoor units connected by refrigerant piping and electrical cables. The system is designed to provide climate control for indoor spaces, offering cooling, heating, and dry modes. It includes advanced features like an Active Clean function for self-cleaning, a Sleep operation for energy saving, and Refrigerant Leakage Detection for safety. The unit can be operated via a remote control or manually in emergency situations.

Important Technical Specifications:

The manual provides operating temperature ranges for both inverter split type and fixed-speed type units, distinguishing between cool, heat, and dry modes for both room and outdoor temperatures.

Inverter Split Type:
- Room Temperature:
  - Cool mode: 60°F - 90°F (16°C - 32°C)
  - Heat mode: 32°F - 86°F (0°C - 30°C)
  - Dry mode: 50°F - 90°F (10°C - 32°C)
- Outdoor Temperature:
  - Cool mode: 5°F - 122°F (-15°C - 50°C) (For models with low-temp cooling systems)
  - Heat mode: 5°F - 75°F (-15°C - 24°C)
  - Dry mode: 32°F - 122°F (0°C - 50°C)
Fixed-Speed Type:
- Room Temperature:
  - Cool mode: 60°F - 90°F (16°C - 32°C)
  - Heat mode: 32°F - 86°F (0°C - 30°C)
  - Dry mode: 50°F - 90°F (10°C - 32°C)
- Outdoor Temperature:
  - Cool mode: 64°F - 109°F (18°C - 43°C)
  - Heat mode: 19°F - 75°F (-7°C - 24°C)
  - Dry mode: 64°F - 109°F (18°C - 43°C) (For models with low-temp cooling systems)

The manual also specifies fuse types on the circuit board (PCB), such as T3.15AL/250VAC, T5AL/250VAC, T3.15A/250VAC, T5A/250VAC, T20A/250VAC, T30A/250VAC. Refrigerant piping specifications include maximum length and drop height based on capacity (BTU/h) for R410A Inverter Split Air Conditioners:

< 15,000 BTU/h: Max. Length 82 ft (25m), Max. Drop Height 33 ft (10m)
15,000 and < 24,000 BTU/h: Max. Length 98.5 ft (30m), Max. Drop Height 66 ft (20m)
24,000 and < 36,000 BTU/h: Max. Length 164 ft (50m), Max. Drop Height 82 ft (25m)

Additional refrigerant per pipe length for R410A is specified:

Liquid Side: Ø 0.25 (Ø 6.35m) - 0.16 Oz/ft (15 g/m)
Liquid Side: Ø 0.375 (Ø 9.52m) - 0.32 Oz/ft (30 g/m)

Torque requirements for flare nuts are provided for different pipe diameters:

Ø 0.25 (Ø 6.35mm): 13-15 ft-lbs
Ø 0.375 (Ø 9.52mm): 23-29 ft-lbs
Ø 0.5 (Ø12.7mm): 36-43 ft-lbs
Ø 0.63 (Ø 16mm): 42-52 ft-lbs
Ø 0.75 (Ø 19mm): 49-74 ft-lbs

Usage Features:

Indoor Unit Display: Features indicators for "fresh" (Fresh and UV-C lamp), "defrost," "run," "timer," Wireless Control, and a two-digit display for temperature, operation features, and error codes (e.g., "07" for TIMER ON, "OF" for TIMER OFF, "df" for defrosting, "FF" for 8°C heating, "CL" for Active Clean).
Auto-Restart: Automatically restarts with prior settings after a power loss.
Louver Angle Memory: Louver resumes its former angle upon turning on.
Active Clean Function: Washes away dust from the heat exchanger by freezing and thawing frost, followed by a blow-dry.
Breeze Away: Directs airflow away from the body for comfort.
Refrigerant Leakage Detection: Displays "ELOC" or flashes LEDs when leakage is detected.
Sleep Operation: Decreases energy use by adjusting temperature (increases by 2°F/1°C per hour in COOL mode, decreases by 2°F/1°C per hour in HEAT mode for the first two hours), then maintains the final setting for 8 hours.
Setting Angle of Airflow: Vertical airflow can be adjusted via the SWING/DIRECT button on the remote control. Horizontal airflow is adjusted manually using a deflector rod.
Manual Operation (without remote): Allows activation of FORCED AUTO mode, FORCED COOLING mode, or turning off the unit by pressing the MANUAL CONTROL button on the indoor unit.

Maintenance Features:

Cleaning Your Indoor Unit: Wipe with a soft, dry cloth; for dirtier units, use a cloth soaked in warm water. Avoid chemicals, solvents, or water hotter than 104°F (40°C).
Cleaning Your Air Filter: Clean every two weeks. Remove the filter, unclip any small air freshening filter, vacuum the small filter, wash the large filter with warm, soapy water, rinse, dry in a cool place, re-clip, and reinsert.
Air Filter Reminders:
- Cleaning Reminder ("CL"): Flashes after 240 hours of use. Reset by pressing the LED button 4 times or MANUAL CONTROL button 3 times.
- Replacement Reminder ("nF"): Flashes after 2,880 hours of use. Reset by pressing the LED button 4 times or MANUAL CONTROL button 3 times.
Maintenance - Long Periods of Non-Use: Clean all filters, run FAN function until dry, turn off unit, disconnect power, and remove remote control batteries.
Maintenance - Pre-Season Inspection: Check for damaged wires, clean all filters, check for leaks, replace batteries, and ensure air inlets/outlets are not blocked.
Troubleshooting: Provides a comprehensive list of common issues, possible causes, and solutions, including issues related to unit not turning on, mode changes, mist emission, noises, outdoor unit operation, and poor cooling/heating performance. It also lists error codes (E(x), P(x), F(x), EH(xx), EL(xx), EC(xx), PH(xx), PL(xx), PC(xx)) and advises contacting customer service if problems persist.