To Next Page
J
Jason RobinsonJul 31, 2025
Why is my Perfect Flame 720-0335 Grill not getting hot enough?
- XxhopkinsJul 31, 2025
If your Perfect Flame Grill isn't heating up properly even when the control knob is set to 'HI', here are a few things to check: * Ensure the fuel hose isn't bent or kinked. * Clear any dust from the grill area. * Make sure both the burner and orifice are clean. * Inspect for spiders and insects. Also, the regulator might have a safety feature that reduces gas flow if it detects a leak. This can sometimes activate even without an actual leak. To reset it, follow these steps: 1. Turn off all burners and close the LP tank valve. 2. Disconnect the regulator from the LP tank and wait one minute. 3. Reconnect the regulator to the LP tank, slowly open the LP tank valve fully. 4. Light all burners and monitor the temperature.
General
