12
GB
Presetting stations
You may store your preferred FM radio stations to the preset station
memories (1 to 5). The procedure for setting presets and using them to
tune stations is described below.
1. Press the POWER button to turn on the radio.
2. Press the SOURCE button and tune to the required station as
previously described.
3. Press and hold the required Preset button (1~5) until radio
beeps once and the display shows corresponding “Px” on the upper
right corner.
4. Repeat this procedure for the remaining presets as you wish.
5. Stations stored in preset memories may be overwritten by following
above procedures if required.
Recalling a preset station from preset memories
1. Press the POWER button to turn on the radio.
2. Press the SOURCE button to select FM band.
3. Momentarily press the required Preset button (1~5) to cause your
radio to tune to the station stored in preset memory.
2
3
To Next Page
Loading...
