Lead the shockcord through both loops in the
lines around jib shackles and tie shockcord
together. Slide the knot into the sock to hide
from view.
One side of 4-way system completed.
Entire 4-way system completed.
JIB SHEET
Tie a 1/4" shackle to the middle of the 3/16"
x 6’ line provided.
Tie the small jib clew blocks to each end of the
line using a small bowline. Thread the 5/16" x
33’ jib sheet line by tying off one end to jib
ratchet block with a bowline. Thread through
small jib clew blocks, through cleat of jib
block, across trampoline and through opposite
jib block in opposite direction. Jib sheet
should be one continuous line.
10
To Next Page
Loading...