To Next PageTo Next Page
Need help?Do you have a question about the Performance Cruising Gemini 105Mc and is the answer not in the manual?
General| Brand | Performance Cruising |
|---|---|
| Model | Gemini 105Mc |
| Category | Boat |
| Language | English |
Explains battery setup, capacity, and switch operation for power management.
Details propane tank setup, regulator, and junction box for fuel system.
Details engine seacock, fuel selection, and drive leg operation for startup and motoring.
Lists circuit breakers for 12-volt systems including lights, instruments, and pumps.
Describes water tanks, fills, vents, and the cold water system operation.
Details the fume detector and control system for propane safety.
Details starting the refrigerator on propane, including troubleshooting.
Explains operating the refrigerator on AC power and proper shutdown.
Describes the stove operation, burners, broiler, oven, and flame failure device.
Explains the absorption refrigeration process for cooling.
Describes the Gemini's battery setup, capacity, and deep cycle technology.
Details the location, operation, and cautions for the battery switch.
Introduces the Westerbeke engine, its specifications, weight, and fuel economy.
Provides step-by-step instructions for raising the drive leg using hydraulic controls.
Provides step-by-step instructions for lowering the drive leg, ensuring proper locking.
Refers to the Sillette manual for drive leg operation and maintenance.
Discusses centerboard design, performance benefits, and comparison to fixed keels.
Details the Gemini's one-piece hull construction, gel coat, and lay-up process.
Explains anchor setting techniques, chain/rope scope, and chafe guard.
Explains how to secure a boat to a dock using bow, stern, and spring lines.
Describes how to approach and pick up a mooring safely, using communication.
Discusses bottom paint types, application, and maintenance for hull protection.
Explains how to block the Gemini for storage or transport, ensuring even weight distribution.
Lists pre-departure checks including safety equipment, charts, and engine systems.
Lists checks and procedures before leaving the boat, such as securing hatches and turning off systems.
Provides guidance on breaking in the diesel engine for proper ring and cylinder surface conformity.
Details oil and filter change procedures, recommending specific filter and oil types.
Outlines daily, monthly, and periodic maintenance tasks for the Westerbeke engine.
