CARE AND MAINTENANCE
I.A Torque Wrench is a precision instrument and should be
handled and stored with care. Do not throw it around, hammer
with it, or use it as a prybar.
2.The wrench is lubricated for life and should not be oiled. The only
exception is the ratchet head which may be lubricated as needed
for smooth operation.
3.The plastic grip is not affected by petroleum products but may be
damaged by some industrial solvents. Clean with a clean cloth
soaked in mineral spirits or denatured alcohol. NEVER IMMERSE
THE WRENCH OR ANY PORTION OF IT IN ANY LIQUID!
4.This is a precision measuring instrument. Calibration and servicing
must be done regularly and is the owner's RESPONSIBILITY.
TORQUE UNIT CONVERSION
MULTIPLY
UMBER OF
TO
OBTAIN
Inch Ounces
Inch Pounds
Foot Pounds
Newton- Meters
Or divide by 16
2 ordivideby 12
Inch
Inch
Ounces
Pounds
1
16
.06251
1
.005208 .
.1130
.007061
Foot
Pounds
192
12
1
Newton
Meters
141.6
8.851
.7376
1
CERTIFICATION
This torque wrench is certified to have been calibrated prior to
shipment to the accuracy off ±4% in the right hand direction,
and ±6% in the left hand direction on readings 20% to 100% of
capacity. On readings below 20% of capacity, the accuracy is
± two minor scale increments.
To Next Page
Loading...
