How to remove air trapped in Performance Tool grease gun?
To remove trapped air from the head of your Performance Tool grease gun, loosen the barrel by unscrewing it two turns. Then, move the plunger rod back and forth to expel the trapped air. Finally, press the air purge valve or pump the handle to completely remove the air.
What to do if Performance Tool Tools hose is blocked?
If you suspect a blocked hose on your Performance Tool Tools, remove the hose and operate the grease gun. If grease dispenses without the hose, the issue lies within the hose itself. Clean the extension or replace it to resolve the blockage.
How to adjust grease coupler jaws on Performance Tool Tools?
The Performance Tool Tools coupler has adjustable jaws. To open or close the 4 internal jaws, twist the nose of the coupler.
Addresses issues with grease coupler jaws not fitting or staying on fittings, suggesting adjustments.
Details causes like plugged fittings or loose couplers, and solutions for proper connection.
Explains air in the head, blocked hoses, or thick/cold grease as causes and provides solutions.
General| Brand | Performance Tool |
|---|---|
| Model | W54197 |
| Category | Tools |
| Language | English |
To Next Page