Electrical information
WARNING: To avoid electrical hazards, fire hazards, or damage to the tool, use proper
circuit protection. The router table and router are wired at the factory for 115 V operation. Connect
to a 120 V, 15 A circuit and use a time delayed fuse or circuit breaker. If the power cord is worn,
cut, or damaged, replace it immediately.
Double insulated
This router table has a plug that looks like the one shown in Fig. A.
The router table is double insulated for additional user protection.
All exposed metal parts are isolated from the internal metal motor
components with protective insulation.
WARNING: Double insulation does not take the place of normal safety precautions when
operating this tool.
WARNING: To avoid electrocution:
Use only identical replacement parts when servicing a tool with double insulation. Servicing should
be performed by a qualified technician.
Do not use power tools in wet or damp areas or expose tools to rain.
Grounding instructions
In the event of a malfunction or breakdown, grounding provides the path of least resistance for
electric current and reduces the risk of electric shock. This tool is equipped with an electric cord
that has a polarized plug. The plug MUST be plugged into a matching outlet that is properly
installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit in the outlet, have the proper
outlet installed by a licensed electrician.
7
To Next Page
Loading...