Need help?Do you have a question about the PerkinElmer Frontier IR and is the answer not in the manual?
General| Brand | PerkinElmer |
|---|---|
| Model | Frontier IR |
| Category | Measuring Instruments |
| Language | English |
Summarizes essential safety precautions for instrument operation.
Details general safety requirements and operating conditions for the instrument.
Guidelines for instrument placement and proper ventilation for cooling and gas dispersion.
Safety procedures for electrical connections and internal components.
Details laser safety standards and precautions for the instrument.
Overview of instrument features and configurations for MIR, NIR, and FIR.
How to change instrument configurations like range, source, detector, and beamsplitter.
Explanation of the instrument's display and Go button.
Description of the sample compartment, its lid, baseplate, and window precautions.
List of various sampling accessories for MIR, NIR, and FIR ranges.
General requirements for instrument setup, including electrical and environmental factors.
Safe unpacking procedures for the instrument and its components.
Guidance on connecting the spectrometer to a PC and electrical supply.
Steps to install software and set up the instrument using the Install Wizard.
Fundamental control operations using Spectrum software, including starting the application.
Procedures for collecting sample spectra, including setting parameters and background scans.
How to switch between MIR, NIR, and FIR ranges using Spectrum software.
Feature for correcting atmospheric effects in spectra using advanced routines.
Explanation of Absolute Virtual Instrument correction for calibration and lineshape.
Tool for assessing spectral data quality and suggesting improvements.
Instructions for cleaning the instrument's exterior and display.
Procedures and safety precautions for moving the instrument.
Steps to change sample compartment windows for MIR and FIR ranges.
Procedure for changing instrument desiccant and setting the replacement interval.
Procedure for purging the spectrometer with dry air or nitrogen for maintenance.
Procedure for cooling the MCT detector with liquid nitrogen.
Safely opening the instrument's main cover for performing maintenance tasks.
Procedure for replacing the instrument's source, including cooling precautions.
Guides on installing or replacing filters into the instrument's filter wheel.
Procedure for replacing the laser and its associated power supply unit.
Step-by-step guide for removing and installing sample area accessories.
Description of the instrument's self-check sequence and initialization messages.
Methods for validating instrument performance using reference samples and software.
Guidance on decontaminating and cleaning the instrument before service or return.
Waste Electrical and Electronic Equipment (WEEE) disposal instructions for compliance.
To Next Page