EasyManuals Logo

PerkinElmer FL 8500 User Manual

PerkinElmer FL 8500
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
09931519A
PerkinElmer, 710 Bridgeport Avenue,
Shelton, CT 06484-4794, U.S.A
Produced in the USA.
FL 6500/8500 Single Cell Peltier Holder
Installation Instructions
This instruction sheet describes the installation of this accessory which is used with the FL 6500/8500
Fluorescence Spectrometer.
NOTE:
Read these instructions before you install this accessory.
Contacting PerkinElmer
Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part
numbers.
See our website:
http://perkinelmer.com
PerkinElmer's catalog service offers a full selection of high-quality supplies.
To place an order for supplies and many replacement parts, request a free catalog, or ask for information:
If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be
shipped promptly, usually within 24 hours.
If you are located outside of the U.S., call your local PerkinElmer sales or service office.
Features
Full software control
Liquid cooling system
N
2
gas purging available
Figure 1 Single Cell Peltier Holder [P/N: N4201029]

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PerkinElmer FL 8500 and is the answer not in the manual?

PerkinElmer FL 8500 Specifications

General IconGeneral
TypeFluorescence Spectrometer
Excitation Wavelength Range200 - 900 nm
Emission Wavelength Range200 - 900 nm
InterfaceUSB
Power Requirements100-240 VAC, 50/60 Hz
Light SourceXenon Lamp
DetectorPhotomultiplier Tube
Spectral Bandwidth2.5, 5, 10, 20 nm (excitation and emission, continuously variable)

Related product manuals