403D-11 Engine
Table 20
403D-11 Engine
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
1.9 2.0
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity
of the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
403D-15 and 403D-15T Engines
Table 21
403D-15 and 403D-15TEngines
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
2.6 2.7
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity
of the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
404D-15 Engine
Table 22
404D-15 Engine
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
2.4 2.5
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity
of the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
404D-22, 404D-22T, and 404D-22TA
Engines
Table 23
404D-22,404D-22T, and 404D-22TA Engines
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
3.6 3.8
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity
of the External System in this row.
(2)
The Total Cooling System capacity includes the capacity for the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
i02959101
Fluid Recommendations
(Fuel Specification)
• Glossary
• ISO International Standards Organization
• ASTM American Society for Testing and Materials
• HFRR High Frequency Reciprocating Rig for
Lubricity testing of diesel fuels
• FAME Fatty Acid Methyl Esters
• CFR Co-ordinating Fuel Research
• LSD Low Sulfur Diesel
• ULSD Ultra Low Sulfur Diesel
• RME Rape Methyl Ester
• SME Soy Methyl Ester
• EPA Environmental Protection Agency of the
United States
General Information
NOTICE
Every attempt is made to provide accurate, up to date
information. By use of this document you agree that
Perkins Engines Company Limited is not responsible
for errors or omissions.
SEBU8311-09
43
Maintenance Section
Fluid Recommendations
To Next Page
Loading...
