Need help?Do you have a question about the Perkins WS 1300 Series EDi and is the answer not in the manual?
Outlines important safety measures and warnings for operating and maintaining the engine.
Guides users on proper maintenance practices for optimal engine performance and longevity.
Details procedures to prevent engine damage during prolonged periods of disuse or storage.
Information on obtaining necessary repairs and genuine parts from Perkins distributors.
Availability of local training for engine operation, service, and overhaul.
Availability of workshop manuals and other service publications from Perkins distributors.
Explains how to identify engine types using code letters and engine numbers.
Provides technical specifications and data for the 1300 Series EDi engines.
Identifies engine components in the front and left side view with numbered labels.
Identifies engine components in the rear and right side view with numbered labels.
Step-by-step guide on starting the engine under normal temperature conditions.
Procedure for starting the engine using an ether start system in very cold conditions.
Instructions on safely stopping the engine, including recommended idle time before shutdown.
Notes that idle and maximum speed settings are not operator adjustable.
Warns against prolonged operation at idle speed due to potential performance issues.
Explains that gradual running-in is not necessary but advises on initial load application.
States that the engine management system automatically compensates for altitude.
Guidelines for maintenance intervals based on operating conditions and local regulations.
Detailed maintenance schedules based on hours or months, with specific operations listed.
Step-by-step instructions for safely draining the engine's cooling system.
Procedure for refilling the cooling system, emphasizing slow filling to remove air.
Instructions for replacing the coolant filter canister for two different types of filter heads.
Guidance on checking the condition of the drive belt, as tension is automatic.
Steps for removing the drive belt using a tensioner lever.
Information on the fuel pre-filter, including checking and draining for water.
Procedure for cleaning the fuel strainer and replacing the fuel filter canister.
Steps to remove air from the fuel system to ensure proper engine starting.
Detailed steps for draining old oil and refilling with new lubricating oil.
Procedure for replacing the lubricating oil filter canister.
Discusses the importance of air filter service based on environmental conditions.
Explains the function and testing of the restriction indicator for the air filter.
Detailed procedure for checking and adjusting valve tip clearances when the engine is cold.
Details the recommended fuel quality, cetane number, viscosity, and other properties for optimal performance.
Specifies API CI-4 or DHD-1 for lubricating oil and provides viscosity recommendations based on temperature.
Outlines requirements for coolant, including antifreeze type, corrosion inhibitors, and water quality.
A table listing common engine problems and their potential causes, categorized by user or workshop checks.
A comprehensive numbered list of potential causes for engine faults, cross-referenced with the problem table.
To Next Page
General