Perlick PKD24B - Installers Checklist

Getting Started
PKD24B Installation & Operations Manual Rev. 11.09 Page7
2.2.4. Installers Checklist
 Glasswasher checked for concealed damage
 Hot water supply is 140° F (60 C)
 Incoming water supply line is ½” minimum
 Supply circuit breaker for machine is properly sized (20 amp)
 Service voltage and phase type are correct to machine data plate
 Drain hose is installed with adequate air gap
 Glasswasher is properly grounded
 Glasswasher is properly leveled
 Machine circuit breaker is labeled “Glasswasher”
 Machine has been connected with correctly sized wire (12 gauge
minimum)