Perma ULTRA - Page 3

© 2023 | perma-tec GmbH & Co. KG | www.perma-tec.com | 3
This installation guide provides instructions for the installation of perma ULTRA and helps in preventing basic mounting errors. The guide
should be used with the operating instructions.
Drawings are only examples. There are many other possibilities for mounting, depending on local conditions.
Disclaimers of corresponding operating instructions apply.
Installation guides do not affect validation of the operating instructions.
• perma ULTRA is a single-point lubrication system. You must use a separate lubrication system for each
lubrication point.
• Use an INSTALLATION KIT ULTRA or an ACCESSORY KIT ULTRA for mounting the perma ULTRA.
• Replace the application‘s grease tting with a suitable reducer. perma offers a wide assortment of reducers, extensions, tubes / hoses,
brackets and other accessories. See our product catalogue for the entire overview on perma accessories.
• Ensure that the lubrication point is prelled with fresh lubricant before installation. perma offers all of its lubricants in 400 g cartridges
for grease guns.
• Select the right lubricant for your application. perma offers a wide variety of standard lubricants for different applications. See our
product catalogue for further information.
• All metal to metal connections must be glued together with Loctite® 243™.
• Fill grease lines and accessories with the same lubricant that is contained in the lubrication system.
• For managing serveral lubrication points we recommend the use of a lubrication maintenance plan. You can use the free
perma CONNECT (https://perma-connect.com/) for online administration.
• Information about the selection of suitable lubricants can be found in our product catalogue. Selection is also possible via the
perma SELECT APP (https://www.perma-tec.com/en/service/perma-select-app/). This free software helps you nd the most
suitable lubrication system, the ideal lubricant and the right discharge period.
Basic guidelines