Need help?Do you have a question about the Perma Distributor PRO MP-6 and is the answer not in the manual?
General| Number of Outlets | 6 |
|---|---|
| Operating Temperature | -20 °C to +80 °C |
| Outlet Connection | M10x1 |
| Weight | 2.5 kg |
| Lubricant Capacity | 6 liters |
| Type | Progressive |
| Material | Steel |
Provides essential information for quick and easy operation and setting of the perma PRO.
Guides on how to mount the drive unit and assemble the lubrication system.
Covers preparations, initial setup, operation, switching on/off, and discharge period settings.
Details the procedure and important considerations for replacing the PRO LC canister.
Provides guidance on error messages, causes, and remedial actions for system malfunctions.
Instructions for mounting the drive unit and assembling the PRO C lubrication system.
Details preparations, setup, operation, switching on/off, and discharge period settings for PRO C.
Procedure and considerations for replacing the PRO LC canister in the PRO C system.
Guidance on error messages, causes, and remedial actions for the perma PRO C system.
Guides on mounting connections and the distributor housing for the perma MP-6.
Details connecting the distributor to a PRO range lubricator, including direct mounting.
Covers preparations, setting into operation, during operation, and switching the system on/off.
Provides guidance on distributor error messages and troubleshooting.
To Next Page
