10
Contact ID Reporting Codes
To comply with AS2201.5 these event IDs must be mapped correctly at the
monitoring centre
PERMACONN CONTACT ID EVENT TEMPLATE
Event
ID
Partition Zone Description
313 0 954
Engineering Reset (changed encryption key)
No action required.
350 0 953
Fail To Communicate – Permaconn experienced trou-
ble sending signals do not expect restore.
352 0 956
Dialer Interface Lead Fail – Issue with dialer lead be-
tween Permaconn unit and the alarm panel.
356 0 969 Permaconn communicator – Cellular network poll fail
356 0 970 Permaconn communicator is offline.
140 0 981
Auxiliary 1 – Auxiliary input alarm on Permaconn com-
municator
140 0 982
Auxiliary 2 – Auxiliary input alarm on Permaconn com-
municator.
140 0 983
Auxiliary 3 – Auxiliary input alarm on Permaconn com-
municator.
300
0
984 Panel ID Clash— When two (2) Permaconn devices are reporting to
the same Control Room on the same line number using the same ac-
count number.
Check in Atlas for duplicate account number.
PM24 Installation Manual v1.1 RDCCO_2204_E_IN
To Next Page
Loading...