Permaconn PM24 User Manual

3
Introduction
The Permaconn system provides two-way communication between supervised
premises and the Monitoring Centre. The PM24 is a versatile state of the art
microprocessor based LTE CAT M1 security communicator. This unit can inter-
face with a range of alarm panels using serial or Contact ID.
 The Permaconn PM24 reports Contact ID events on the CAT M1 network.
 The Permaconn PM24 polls according to the registered fault recognition time.
Features of the Permaconn PM24
 Three (3) Outputs
 Contact ID reporting through Alarm Panel Dialler
 High Speed RS232 interface
 Serial interface to Cardax, Concept, Tecom, MCM and Siemens
 Monitors and reports status of alarm panel interface lead
 Non-volatile memory stores all setup information in the event of a power failure
 Single SIM
 Various LED status indicators for easy onsite diagnostics
Data Plan
Supervisory Period Single SIM
12hrs P2
1hr P8
PM24 Installation Manual v1.1 RDCCO_2204_E_IN

Permaconn PM24 Specifications

General

Brand	Permaconn
Model	PM24
Category	Conference System
Language	English