F3 Corpus
Getting to know your wheelchair
• A flashing yellow LED means the seat function is inhibited in
one direction, due to a safety limit. The switches below the
icon will only move the seat in the safe direction.
• A flashing red LED means an actuator error has been
detected. Depending on the type of error, the switches below
may or may not operate the seat function. Note the
circumstances when this indication occurs as this information
may help your service provider. Contact your service
provider for additional assistance, as service may be necessary.
3.5.3.2 Functions
WARNING!
Risk of pinching while using seat functions
There is a risk of crush-point accidents when using the powered seat
functions. Make absolutely sure that nothing gets stuck between moving
parts. Failure to do so may lead to personal injury.
124
To Next Page
Loading...
