F3 Corpus
Troubleshooting
Troubleshooting and repairs must always be performed by qualified
personnel with good knowledge of the wheelchair’s electronics.
8.2.2 Diagnostic screens
8.2.2.1 Current diagnostic screen
When the control system’s integrated protection circuits have
tripped so that the control system can no longer operate the
wheelchair, a diagnostic screen is displayed in the control panel
display.
This indicates a system fault, i.e. R-Net has detected a problem
somewhere in the wheelchair's power system.
NOTICE
The diagnostic screen displays error
occasionally
If the fault is in a module not currently in use, it may still be possible to drive
the wheelchair, but the diagnostic screen will display error occasionally.
262
To Next Page
Loading...
