10
(Fig.3-5)
At the bottom of this page, enter the gain value by pressing the numeric keys (1~8). The range is 1~8.
If the entered figure exceeds the range, the system will delete what has been entered automatically and you
should start a new entry again. Press 【ENTER】to confirm, and press 【RETURN】to quit, returning to
the menu of parameters setting.
Note: Generally speaking, the user needn’t use the energy method.
Selecting math calculation
On the menu of (Fig.3-3), select ⊙ Math Count, then press 【ENTER】to display the menu as
shown in (Fig.3-6):
(Fig.3-6)
At the bottom of this page, enter the K factor by pressing the numeric keys (0~9), decimal point【．】
and negative sign 【-】. Press 【RETURN】 key to clear the mistakes, and press 【CE】 to clear step
by step, then press 【ENTER】 key to confirm. The system will prompt the user to input factor B. Press
【ENTER】 key to confirm and quit. If nothing is to be entered, press 【RETURN】 key to quit this page
directly. The range is from -999 to 999. If the entered figure exceeds the range, the system will delete what
has been entered automatically and you should start a new entry again.
Selecting the sample cell
On the menu of (Fig.3-3), select ⊙ Cell Setting, then press 【ENTER】 to display the menu as
shown in (Fig.3-7) (Fig.3-8):
To Next Page